Life Guard Battery Protector

DIRECTIONS:

Shake Well Worth LIFE GUARD™ Battery Protector #3003 well before use.
For new batteries, make sure the battery terminals and cable connections are properly installed before treatment.
Hold the aerosol can approximately 10–12 inches from the battery posts, terminals, cables, and carrier.
Apply an even coating to all areas requiring protection.
For best results, apply two light coats to the battery terminals.
For older batteries, first remove existing corrosion using a battery cleaner such as Well Worth KLEEN SEEK™.
Once the battery and terminals are completely clean and dry, apply LIFE GUARD™ using the same procedure as for a new battery.
Allow the protective coating to dry before returning the vehicle to normal service.
Use in a well-ventilated area and keep away from heat, sparks, and open flames.

OUTSTANDING FEATURES:

• Professional battery terminal protector designed to seal battery posts, terminals, cable connections, clamps, and related components against corrosion.
• Distinctive purple protective coating makes treated areas easy to identify during service and inspection.
• Helps prevent corrosion buildup caused by battery acid fumes, protecting electrical connections over extended periods.
• Helps maintain full battery power by reducing corrosion-related voltage loss.
• Helps improve electrical contact at battery terminals and cable connections.
• Flexible protective film remains pliable in low temperatures and resists cracking, chipping, and peeling.
• Provides months of battery-terminal protection when properly applied.
• Ideal for dealerships, service departments, repair shops, fleet maintenance, and professional battery service.
• Well Worth product number 3003.
• 10 oz aerosol can.
• 12 cans per case.