Rubberized Undercoat

DIRECTIONS:

Make sure the surface is clean, dry, and free of loose rust, dirt, grease, oil, and peeling coatings before application.
Mask surrounding areas that should not be coated.
Shake the Hi-Tech HT-18023 Premium Rubberized Undercoat aerosol can vigorously for at least 1 minute after the mixing ball begins to rattle.
Continue shaking periodically during use.
Hold the can approximately 10–12 inches from the surface.
Apply using smooth, even sweeping motions.
For best results, apply multiple light coats rather than one heavy coat.
Allow adequate drying time between coats.
Once dry, the coating may be painted if desired.
Use only in a well-ventilated area and keep away from heat, sparks, and open flames. Do not store above 120°F (49°C).

OUTSTANDING FEATURES:

• Premium rubberized undercoating designed to protect automotive metal surfaces from rust and corrosion.
• Forms a durable protective barrier against moisture, road salt, gravel, and other road debris.
• Quick-drying adhesion helps provide efficient, dependable application.
• Resists cracking and chipping under normal conditions for longer-lasting protection.
• Helps reduce road noise and vibration by adding a sound-dampening rubberized layer.
• Excellent for undercarriages, wheel wells, replacement panels, section repairs, weld joints, and rust-repair areas.
• Paintable black finish allows the cured coating to be top-coated when desired.
• Water-resistant, flexible rubberized coating helps maintain protection under demanding automotive conditions.
• VOC compliant.
• Body shop safe.
• Deep black finish.
• 17 oz aerosol can.
• 12 cans per case.